EPOXY RESIN 4 ARTIFICIAL FLOWER ARRANGEMENT CRYSTAL CLEAR WATER SIMULATION -BULK

Description

MAX TCR A/B
Thick Casting Resin
2 Gallons -
256 Fluid Ounce Kit
Combine Volume
1 Gallon Of MAX TCR Part A - Resin
1 Gallon Of MAX TCR Part B - Curing Agent
Formulated Crystal Clarity And Color Stability
Cures Flexible To Reduce Glass Vase Breakage Due To Expansion & Contraction From Temperature Variation
Slow Cure To Allow Air Bubbles Degas And Reduce Yellowing From Exothermic Heat
1:1 Mix Ratio And Low Viscosity Formulation
Bonds To Glass Vases, Plastic & Artificial Floral Arrangements
Cures Water Clarity
Long Working Time To Minimize Yellowing And Air Bubble Entrapment
Low Exothermic Heat Generation During Large Mass Casting
Low Odor, Low Toxicity Resin System
Allows Expansion And Contraction Preventing Glass Vase Breakage
Maintains Clarity And Color Stability
DESCRIPTION
MAX TCR A/B is formulated to simulate the appearance of water in an artificial floral arrangement. It offers crystal clarity, low viscosity and a long working time.  The long working time helps reduce premature yellowing from exothermic heat during curing and allows air bubbles to outgas and yields optically clear casting.
Upon cure, MAX TCR A/B exhibits a strong bond to the artificial arrangements, glass embeds, and the glass vase itself. The embedded and artificial or silk floral stacks are all resistant to pulling.
It is designed to be flexible to prevent the glass vase from shattering caused by expansion and contraction, especially on a thin-walled glass vase.
MAX TCR A/B is mixed 1:1 by volume or by weight, sets in 24 hours and fully cures in 48 hours. Longer cure times may occur at when cured at cold temperatures. MAX TCR A/B works well as an embedding resin for diorama and display applications.
MAX TCR A/B Available Kit Sizes
3 Each – 6-Fl.Oz RupturePak Kits
https://www.ebay.com/itm/223706032469
½ Gallon :
64 Fluid Ounce
Kit
https://www.ebay.com/itm/223706032469
1 Gallon
: 128 Fluid Once Kit
https://www.ebay.com/itm/222625084887
2 Gallon
:256 Fluid Ounce Kit
https://www.ebay.com/itm/313127001631
MAX TCR CURED PHYSICAL PROPERTIES
Density
1.09 g/cc
Form and Color
Clear Liquid
Viscosity
2000 cPs @
77°F
Mixed
Mix Ratio
1:1 By Weight Or Volume
Working Time
>4 hours at
77°F
(
1000 Gram
Mass)
Peak Exotherm
120°F
(
1000 Gram
Mass)
Full-Cure Time
48 to 96 Hours Minimum
Accelerated Cure Time (Post Heat Cure)
6 Hours @ Room Temp Cure + 120 Minutes @
175°F
Shore Hardness
50
5 Shore A @
77°F
Elongation
75% @
77°F
Tensile Shear Strength
800 PSI @
77°F
Tee-Peel Strength
4 Pounds
Per Inch Width @
77°F
Tear Strength
27 Pounds
@
77°F
Clear Epoxy Resin For Flower Arranging -Creates Artificial Water In Glass Vase. MAX TCR A/B - YouTube
Video will open in a new window
Using the eBay App? Paste link into a browser window:
[isdntekvideo]
THIS KIT INCLUDES A SET OF YORKER CAPS FOR CONTROLLED DISPENSING.
Use these Yorker caps to dispense the material with ease and minimize over pouring and reduce spills. We do not recommend using
dispensing pumps. The curing agent or PART B of an epoxy resin system is sensitive to moisture and carbon dioxide, which will react with the curing agent and form carbamate crystals (salt-like crystals that form on the tip of the pump) and reduce reactivity.
Unless the kit is used continuously and within a short period of time, using dispensing pumps will cause more problems than ease-of-use. The pump leaves the bottle open to moisture (from the pressure-relief hole) and unless you plan on using the whole kit in less than a month, the curing agent will degrade and cause other curing problems.
CARBAMATE CRYSTALS THAT FORM ON THE PUMP WHEN THE CURING AGENT IS EXPOSED AMBIENT  MOISTURE AND CARBON DIOXIDE. THESE CRYSTALS ARE INSOLUBLE IN EPOXY RESIN RESULTING IN CONTAMINATION AND CAUSES POOR CURE AND AMINE-BLUSHING.
Use these Yorker caps and cut the tip to meter the orifice tip size for accurate dispensing.
When done, replace the tip cap and it will exclude ambient moisture and keep the resin system viable for years.
To use the caps, cut off the tip to the desired hole size, and attach, do not cut pass the ridge line that keeps the tip cap in place.
To dispense, lay the plastic jug unto its side and apply pressure on the bottle to dispense the contents.
When done replace the tip cap and the container is sealed and it will be usable for years.
RESIN CRYSTALLIZATION FROM PROLONGED STORAGE OR COLD WEATHER EXPOSURE
The resin component or PART A may crystallize due to cold temperature exposure or after being stored. MAX TCR A/B
is of a high purity grade that makes it prone to crystallization when exposed to cold temperatures. Similar to high purity compounds like honey that freezes when placed in cold temperature like the refrigerator (below 50ºF or 10ºC); high purity epoxy resins freeze or crystallize below 57°F.
All kits are heat-processed before packaging to ensure PART A is in its liquid form. Please inspect the resin component for any solidified crystals, which will appear as waxy solid or cloudiness on the bottom of the PART A bottle.
To ensure a trouble-free cure, heat-process the PART A bottle, especially for pigmented resin systems and destinations where the cold temperature is expected.
Crystallization also occurs if the kit has been stored over the winter months.
An information postcard is included with each package. View the following video for identification and processing.
DO NOT USE UNLESS PROCESSED TO REVERT ANY CRYSTALLIZED RESIN BACK TO A LIQUID STATE AND AVOID POOR CURED RESULTS.
PROPER MIXING TECHNIQUE
How To Mix Epoxy Resin For Food Contact Coating. Avoid Tacky Spots, Minimize Air Bubble When Mixing - YouTube
Video will open in a new window
Using the eBay App? Paste link into a browser window:
[isdntekvideo]
Click Play Button To View The Video
MAX TCR THICK CASTING RESIN FOR FLORAL
ARRANGEMENTS - YouTube
Video will open in a new window
[isdntekvideo]
MAX TCR A/B
Shore Hardness Durometer: 55A
Storage
Secure the caps for both bottles after use and store above 65°F minimum temperature to prevent re-crystallization. The resin system will remain viable for at least 12 months or longer when stored properly. The PART A or resin component may 'crystallize' after prolonged storage. Please inspect the PART A bottle for any solid crystallization that will appear on the bottom of the bottle.
Please Check Out Other Available Resin Systems At Our eBay Store
For our complete listing, please
Visit our eBay store!
DON'T FORGET OUR EPOXY MIXING KIT
Everything You Need To Measure, Mix, Dispense & Apply The Epoxy Resin
Click The Link To Add To Order
https://www.ebay.com/itm/222623932456
Proportioning the correct amount is equally as important to attain the intended cured properties of the resin system. The container in which the epoxy and curing agent is mixed is an important consideration when mixing an epoxy resin system. The container must withstand the tenacity of the chemical and must be free of contamination. Most epoxy curing agent has a degree of corrosivity, as a general practice, protective gloves should be worn when handling chemicals of the same nature.
MIXING KIT CONTENTS
1 Each Digital Scale -Durable, Accurate Up To 2000.0 Grams
4 Each 32-ounce (1 Quart) Clear HDPE Plastic Mix Cups
4 Each 16-ounce (1 Pint) Clear HDPE Plastic Mix Cups
One Size Fits All Powder-Free Latex Gloves
2 Each Graduated Syringes
Wooden Stir Sticks
Foam Brush
PLEASE CHECK OUT OTHER AVAILABLE
RESIN SYSTEMS AT OUR eBay STORE
IMPORTANT NOTICE
Your purchase constitutes the acceptance of this disclaimer. Please review before purchasing this product. The user should thoroughly test any proposed use of this product and independently conclude satisfactory performance in the application. Likewise, if the manner in which this product is used requires government approval or clearance, the user must obtain said approval. The information contained herein is based on data believed to be accurate at the time of publication. Data and parameters cited have been obtained through published information, Polymer Composites, Inc. laboratories using materials under controlled conditions. Data of this type should not be used for a specification for fabrication and design. It is the user's responsibility to determine this Composites fitness for use. There is no warranty of merchantability of fitness for use, nor any other express implied warranty. The user's exclusive remedy and the manufacturer's liability are limited to refund of the purchase price or replacement of the product within the agreed warranty period.
Polymer Composites, Inc.
and its direct representative will not be liable for incidental or consequential damages of any kind. Determination of the suitability of any kind of information or product for the use contemplated by the user, the manner of that use and whether there is any infringement of patents is the sole liability of the user.